Full calibration dies - Triebel - Waffenwerkzeuge GmbH

Full length dies

Full length dies is used to size the cartridge case on full length.

In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut.

All relevant components have an article number for easy reordering if necessary.

You will find further instructions and assistance in selecting accessories and spare parts in the manual.

Grip grooves

For easier screwing of the die into the press

High quality optical finish

due to ground surface and burnished components

Solid, hardened and internally polished steel body

for extra durability and stability.

Generously dimensioned lock nut

With flat end faces for easy fixing of the spindle

Clear and detailed

Laser marking

Precision ground

Interior expansion

Effective vent hole

in the area of the cartridge shoulder

Metric threaded spindle

for easy stepless adjustment.

Stable counter ring

with holes for common hook spanners and circumferential clamping force without concentrated pressure point on the die thread.

Rounded and replaceable

Ejector pin for small or large ignition holes

Adjusting original Triebel reloading dies

Here you will find detailed instructions for the correct adjustment of the original Triebel reloading dies .

Our products suitable for

Reloading dies for hunters

Reloading dies for sport shooters

Reloading dies for Long Range